Yellow Color Burst Colored UV Resin Hard Type

Now available in 25g bottles! Creating is even EASIER with this new bright and colorful formula of Resin Rockers UV Resin. No more watered down resin or hard-to-achieve black! With Color Burst, it is so easy to pour and cure!

Introducing Resin Rockers Color Burst UV Resin! Known globally for the yellow resistance and crystal clear, non-tacky finish of our Clear formula, Resin Rockers UV Resin is the best in its class and will not disappoint with White Color Burst UV Resin!

Resin Rockers UV Resin is the first product of its kind to leave all your creations crystal clear, durable, and not tacky!

• NOT STICKY!
• Fast Curing - cures in about 60-90 seconds
• Vibrant Colors
• Safe
• Easy to Use
• Non-toxic Once Cured
• Low Viscosity
• Crystal Clear High Gloss Finish
• Extremely High UV Resistance - Anti-yellowing
• Works amazing in jewelry and in Resin Rockers UV Approved molds!

We recommend curing at a maximum of 24-36W using the Magic Cure™️ LED Lamp.

 Please note: Higher wattages are ok but this is a fast curing resin so you must cure for less time under the lamp. Curing for too long at a high wattage can cause any UV resin (all brands) to slightly yellow. Higher wattages can also emit more fumes so it is best to go with the lower wattage if you can.

If cured correctly, the end result of Resin Rockers Color Burst UV Resin is vibrant, rock-solid, and gorgeous!  

PRO TIP:
Pour the resin thicker for more color and in thinner layers for more transparency. The thicker the layer the darker the color will be.

PLEASE READ:  Your safety is our #1 priority so it is important you follow all precautions. This goes with any brand of UV Resin.

• Age recommendation for use is 15+
• Wear nitrile gloves to protect the skin in case of an allergy
• Wear a mask if you have respiratory sensitivity. All brands of UV Resin can let off fumes when it first starts to cure. It is the chemical reaction that occurs when the UV light penetrates the resin itself. We always recommend safety precautions with any chemical product.
• Work in a well-ventilated area

FAQs and Tips:

• If using a mold, only use one that is stable enough to hold the shape of the resin as it cures or it will warp. We have a list of UV approved molds on our website.
• Be sure to work in thin layers for best results when using a deeper mold. It can cure up to 1/2 inch or so as long as the light can penetrate all the way through. It helps to cure on the top for 60 seconds, then flip the mold over and cure a little on the bottom.
• DO NOT USE MOLDS THAT ARE SOLID COLORS - ONLY WORKS IN TRANSPARENT MOLDS!
• If adding metallic flake inclusions, let the piece cool 1-2 minutes after the cure. It can get hot.

Active Ingredients: Acrylic UV Resin

Check out our Instructions and FAQs to learn more!

Questions? Need help? Our support team will respond within 24 hours: help@resinrockers.com

Size: 25g