Perfect and Protect with Resin Rockers Perfect Finish Epoxy Resin. Formulated with the fine artist in mind, it is built to perform seamlessly with most substrates and all techniques involved in fine art canvas coating and tumbler coating. Perfect Finish is a low odor, easy to use, high viscosity, 1:1 ratio, 2-part epoxy system that cures to the ultimate crystal clear, scratch-resistant finish. Carefully engineered with UV and HALS for advanced protection against premature yellowing with a long working time and a seamless finish. You will not find better UV protection than with Perfect Finish.
Perfect Finish can be used on all types and variations of tumblers including glitter vinyl, micas, pigment flakes, alcohol inks and more to create that one-of-a-kind piece AND to add a rock-hard topcoat. It can also be used to coat UV Resin tumbler applications such as drips and embellishments.
This formula is the best in its class when it comes to top-coating fine artwork and doming resin pieces. The UV protection is unmatched. It can also be used to topcoat tables and bar tops.
EASY Application:
Step 1: Prep
For best results, the ideal working temperature is between 75°-85°F. Work in a clean, dust-free environment with low humidity.
Step 2: Measure
Pour equal amounts of resin and hardener into a mixing container.
Step 3: Mix
Stir thoroughly for 1-3 minutes, continuously scraping the sides and bottom of the mixing container. Transfer into a new, clean mixing container and mix again for another 1-2 minutes.
Step 4: Pour
Pour immediately onto your tumbler. Spread epoxy evenly. If bubbles appear, use a propane torch held 6 inches away and sweep rapidly until bubbles disappear. One pass should suffice.
Step 5: Set
For the best curing results, room temperature should remain between 75°-85°F. Cured to the touch in 24 hours, fully cured in 72 hours.
Step 6: Clean up
Wipe down your mixing tools before the resin dries. Uncured resin can be cleaned up with acetone or alcohol. Baby wipes work well also.
How to store my epoxy:
Keep at room temperature dry place. To prevent oxidation, be sure to seal the top air tight. You can also put press n seal wrap under the lid if you will not be using your epoxy for some time to prevent oxygen exposure.
CONFORMS TO ASTM D-4236
PLEASE READ OUR SHIPPING TERMS AND CONDITIONS BEFORE PURCHASE
Additional freight charges may apply for large orders or heavy kits (4 gallons+). Shipping is only available to the US 48 and Canada.
If importing to Canada, you are responsible for all duties, fees, and taxes associated with your order.
The standard processing time for orders is 1-3 business days for in-stock items. Upon order process completion, delivery time is 1-6 business days within the United States and 3-15 for international orders. Please keep in mind during the holidays or limited edition launches, the shipping time may vary and there is always a longer delay with USPS First Class shipping than other methods. Thank you for your patience! We highly recommend purchasing Shipping Protection during checkout. Without Shipping Protection, there is nothing we can do to track or submit claims on USPS First Class shipping.
We are not responsible for any shipping deliveries that may be affected by customs, natural occurrences, transfers from USPS to the local carrier in your country or air and ground transportation strikes or delays, nor any extra fees, customs or back end charges once the package has exited the United States. Customer is responsible for any duties or brokerage fees once the package leaves the United States.
If you are placing a wholesale or bulk order, please understand that shipping can only be estimated until time of shipment. Any orders of 50 or more lbs will need to be quoted from Resin Rockers management.
