Resin Rockers UV Resin is known globally for it's non-tacky, clear finish. This kit makes casting small projects easy and fun!
*Some colors will be more transparent than others. Keep in mind the UV light must still be able to penetrate all the way through the resin to get a perfect cure, so it cannot block the light completely. This resin is primarily used as a casting resin, but can be used to coat for a transparent look.
What's in the Box
10 colors at 25g each:
- White
- Black
- Pink
- Purple
- Yellow
- Green
- Orange
- Seafoam
- Red
- Blue
Resin Rockers Color Burst UV Resin is:
- NOT STICKY!
-
Fast Curing - cures in about 60-90 seconds
- Vibrant Colors
- Safe
- Easy to Use
- Non-toxic Once Cured
- Low Viscosity
- Crystal Clear High Gloss Finish
- Extremely High UV Resistance - Anti-yellowing
- Works amazing in jewelry and in Resin Rockers UV Approved molds!
When cured correctly, the end result of Resin Rockers Color Burst UV Resin is vibrant, rock-solid, and gorgeous!
PRO TIPS:
- Pour the resin thicker for more color and in thinner layers for more transparency. The thicker the layer the darker the color will be.
- Combine your colors to expand your color palette by mixing two or three colors together to create new ones.
PLEASE READ: Your safety is our #1 priority so it is important you follow all precautions. This goes with any brand of UV Resin.
- Age recommendation for use is 15+
- Wear nitrile gloves to protect the skin in case of an allergy
- Wear a mask if you have respiratory sensitivity. All brands of UV Resin can let off fumes when it first starts to cure. It is the chemical reaction that occurs when the UV light penetrates the resin itself. We always recommend safety precautions with any chemical product.
- Work in a well-ventilated area
FAQs and Tips:
- If using a mold, only use one that is stable enough to hold the shape of the resin as it cures or it will warp. We have a list of UV approved molds on our website.
- Be sure to work in thin layers for best results when using a deeper mold. It can cure up to 1/2 inch or so as long as the light can penetrate all the way through. It helps to cure on the top for 60 seconds, then flip the mold over and cure a little on the bottom.
- DO NOT USE MOLDS THAT ARE SOLID COLORS - ONLY WORKS IN TRANSPARENT MOLDS!
- If adding metallic flake inclusions, let the piece cool 1-2 minutes after the cure. It can get hot.
Active Ingredients: Acrylic UV Resin
Check out our Instructions and FAQs to learn more!
Questions? Need help? Our support team will respond within 24 hours: help@resinrockers.com
Size: 10 bottles in the Kit (10 different colors at 25g each) - 250g (9oz.) in total
