FREE SHIPPING on orders over $175 - US 48 States Only
WE SHIP GLOBALLY!
  • Login

Resin Rockers 3:1 Quick Set Premium Coating and Casting Epoxy Art Resin with Advanced Air Release Formula Kit 16oz

1 Review

ABSOLUTELY NO PO BOXES!

NO RETURNS ON EPOXY!


*MUST BE MEASURED BY GRAMS ON A DIGITAL SCALE found 
here

Resin Rockers 3:1 is a resin for the more experienced resin artist.

Resin Art, Jewelry, Coating, Acrylic Pours, Geode Paintings, Casting in Silicone Molds, Flowers, Coasters, Tabletops, Bar tops, Live Edge River Tables, Cutting Boards, and more

3:1 Quick Set Premium Artist Resin
Advanced Air Release Formula
Thin Viscosity

  • Eliminate Microbubbles
  • FDA Compliant Food Safe
  • Crystal Clear Super Gloss Finish
  • Self-leveling & No Shrinking
  • 100% VOC-FREE & Low Odor
  • High UV Resistance
  • Rock Hard Cure Within 8-10 Hours
  • Easy to Mix in Color / Pigment
  • Formulated for Strength

What's in the Resin & Hardener Kits?
16oz Total

• 1 Bottle of Resin (A) - 

12 fl. oz. (360ml.)
• 1 Bottle of Hardener (B) - 

4 fl. oz. (120ml.)

Instructions:

  1. Best results obtained when working at a constant temperature of 75°-85°F, in a clean, dust-free environment with low humidity.
  2. Bathe your resin and hardener in warm water for at least 15 minutes prior to use.
  3. Measure 3 parts of A and 1 part B using a digital scale, measuring by the gram.
  4. Mix thoroughly for 3 minutes, scraping sides of the container as you mix.
  5. Pour into a new, clean container and mix again.
  6. Pour mixture over surface or into mold, only pouring up to ¼” thick.
  7. Use a heat source for a short time to remove bubbles.
  8. Pour second layer when first is slightly sticky. Remove bubbles again.
  9. Piece will begin to feel hard within 15-30 minutes, with a full workability to cure at 8-10 hours.
  10. Allow up to 2-3 days for a full cure, depending on the temperature of your work area.

Pro-Tip: Inclusions need to be bonded to the surface with another epoxy or craft adhesive. If coating wood, bond with Resin Rockers 2:1 to seal the surface from moisture and air first.

  • Causes serious eye irritation.
  • Causes skin irritation.
  • Harmful if swallowed; corrosive.
  • Toxic to aquatic life with long-lasting effects.

DANGER:
PREVENTION: DO NOT EAT, SMOKE, OR DRINK DURING USE. IF IN EYES: RINSE CAUTIOUSLY WITH WATER FOR SEVERAL MINUTES. IF IRRITATION PERSISTS, SEEK MEDICAL ATTENTION/ADVICE. IF ON SKIN: WASH THOROUGHLY WITH SOAP AND WATER. IF SWALLOWED: CALL POISON CONTROL CENTER OR DOCTOR FOR MEDICAL ADVICE.

WEAR PPE: NITRILE GLOVES, EYEWEAR, & A RESPIRATOR MASK RECOMMENDED. PLEASE WORK IN A WELL-VENTILATED AREA.

 

 

Can you use this on tumblers? Yes, but it is a very watery, thin mixture. We recommend a thicker epoxy for tumblers. It is best for casting.

Search