(Residents out of US: Please email us to request an EU, AU, or UK power cord. Otherwise, you can use an adapter on the US power cord that comes standard with this lamp).
We highly recommend adding Route insurance to your order to protect against theft or damage during shipment!
PATENT PENDING
Multiple Colors Available! *No MagicCure® Lamp Exchanges For Color Preference
Please use the recommended 12.6 voltage for the MagicCure® LED Lamp.
DO NOT use the light in or around water/liquids or humid environments such as bathrooms.
Unplug the light or switch off the power when not in use.
DO NOT use it if the power adapter, timer, or unit is damaged.
Keep away from children and pets.
DO NOT look directly into the light.
For indoor use only.
Wear nitrile gloves to protect hands and wrists from light exposure. Certain cosmetics or prescriptive lotions can cause sensitivity to light. If irritation occurs, discontinue use immediately.
DO NOT use products not formulated to cure in the light. It might result in severe chemical burn. DO NOT cure anything other than UV resin under the light. This lamp IS NOT to be used to cure gel nail polish.
DO NOT touch or wipe LED bulbs. Direct contact can shorten the lifespan.
Liability with respect to use shall not exceed the purchase price of the MagicCure® LED Lamp, liability for incidental and inconsequential damages is specifically excluded.
IMPORTANT: Not all UV resin is the same. Our resin is made with premium-grade raw materials, ensuring a quick and rock-hard cure every time. We cannot guarantee that every resin brand will cure with the MagicCure® because some UV resin will never reach the rock-hard state due to low quality. We have tested our lamp against several other highly recommended brands for a thorough cure.
Specifications
Size: 10 x 5 × 4 inches
Weight: 2.7 lbs.
Wavelength: 365-395nm
Adapter: Input: 100-240V 50/60Hz 1.5A max
Output: DC 12.6V =- - 2.0A
Battery: 12.6V Li-lon battery (rechargeable)
Input Voltage: 12.6V - - - 2.0A
Nominal Capacity: 5200mAh
Adjustable Power: 6W-48W
Number of bulbs: 20 LED bulbs
Adjustable Timer: 60s/90s/120s
Accessories: AC/DC charger/adapter, user manual
Important Note on Light Output and Wear Over Time
With regular use, you may notice a gradual decrease in light intensity from your MagicCure® UV Curing Lamp. This is normal and occurs with most LED lights as they experience natural wear and tear. Over time and with extended use, the LED bulb’s brightness will begin to dim, similar to the way a traditional bulb wears out.
To help prolong the lifespan and brightness of your lamp:
Avoid prolonged continuous use by allowing the lamp to cool down between excessive curing sessions.
Follow the recommended usage intervals and timer settings to extend the life of the bulbs.
While this dimming effect is gradual, replacing your lamp when the light intensity no longer provides effective curing will ensure the best results for your resin projects.
Be sure to charge a full 7 hours before you turn it on. If you do not fully charge it, you will reduce the battery life and the LCD screen will not fully power on during the initial use.
Why is my LCD screen blank when I turn it on?
Be sure you are charging it a full 7 hours prior to use. If you have fully charged it and it is still blank, unplug it and flip the power switch on and off a couple of times to reset the lamp. If an issue still persists contact support.
Subscribe to our newsletter
Get the latest updates on new products and upcoming sales!
