MagicCure® LED Lamp Instructions

MagicCure® LED Lamp Instructions

• Please use recommended 12.6 voltage for the MagicCure® LED Lamp.
• DO NOT use the light in or around water/liquids or humid environments such as bathrooms.
• Unplug the light or switch off the power when not in use.
• DO NOT use if power adapter, timer, or unit is damaged.
• Keep away from children and pets.
• DO NOT look directly into the light.
• For indoor use only.
• Wear nitrile gloves to protect hands and wrists from light exposure.
• Certain cosmetics or prescriptive lotions can cause sensitivity to light. If irritation occurs, discontinue use immediately.
• DO NOT use any products that are not formulated to cure in the light. It might result in severe chemical burn.
• DO NOT touch or wipe LED bulbs. Direct contact can shorten the lifespan.

Liability with respect to use shall not exceed the purchase price of the MagicCure® LED Lamp, liability for incidental and inconsequential damages is specifically excluded.

SPECIFICATIONS:

• Size:10 x 5 × 4 inches
• Weight: 2.7 lbs.
• Wavelength: 365-395nm
• Adapter: Input: 100-240V 50/60Hz 1.5A max
• Output: DC 12.6V =- - 2.0A
• Battery: 12.6V Li-lon battery (rechargeable)
• Input Voltage: 12.6V - - - 2.0A
• Nominal Capacity: 5200mAh
• Power: 6W-48W
• Number of bulbs: 20 LED bulbs
• Timer: 60s/90s/120s
• Accessories: AC/DC charger/adapter, user manual

Portable and convenient, Resin Rockers MagicCure® LED Lamp incorporates the latest LED and ion battery technology to allow resin artists to use the lamp anywhere at any time without the frustration of a cord. MagicCure® LED Lamp includes 20 LED lights that feature incredible 365-395m wavelengths that will cure all formulas of Resin Rockers UV Resin with variable wattage options.

Features include:

• Adjustable wattage 6-48 watts.
• Cordless & rechargeable.
• External battery slot for easy replacement.
• Built-in handle for convenient mobility.
• Removable magnetic stainless-steel tray.
• LCD display timer with countdown and wattage gauge.
• Custom preset cure timer 60s/90s/120s.
• Mirrored interior for 360°cure.

INSTRUCTIONS

Resin Rockers MagicCure® LED Lamp is equipped with three pre-programmed timers to ensure accurate curing of all Resin Rockers UV Resin Formulas. MagicCure® LED Lamp has Adjustable wattage from 6-48 watts, with an estimated life of 50,000 hours. MagicCure® is fully rechargeable with one charge lasting approximately three hours.

1. Connect the power adapter to the LED light. Then insert the adapter into a power outlet. Allow your lamp to fully charge prior to initial use. Charging adapter shows a red light while charging and a green light means fully charged.

                   Charge for a minimum of 7 hours prior to initial use.

If the lamp's battery is fully charged, it is not necessary to connect the power adapter to use.

2. To enable curing, select your preferred wattage using the W button. Choose from the 30, 60, or 90-second timer buttons and press to begin curing. Repeat as recommended until project is fully cured. Refer to the chart below for recommended curing times.

3. Recommended Curing Wattage and Times*: